TECHNICAL DATA SHEET
PRODUCT DESCRIPTION
KS908C UV Resin is an ABS like SLA resin which has accurate and durable features. It is designed for solid state SLA platforms.
KS908C UV Resin can be applied in master patterns, concept models, general parts and functional prototypes in the field of automotive, medical and consumer electronics industries.
The parts durability building with KS908C UV Resin is over 6.5months.
TYPICAL FEATURES
-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines
-Improved strength retained, improved dimensions retention of parts in humid condition
-Need minimal part finishing
-Long shelf life in machine
TYPICAL BENEFITS
-Need less part finishing time,easier post-curing
-Building accurate and high tough parts with an improved dimensional stability
-High quality controls for vacuum casting parts
-Low shrink and good resistance to yellowing
-Magnificent brown color
-Outstanding machinable SLA material
-Outstanding temperature resistant
Physical Properties – Liquid Material
Appearance | Brown |
Density | 1.11-1.14g/cm³ @ 25 ℃ |
Viscosity | 405~500 cps @ 28 ℃ |
Dp | 0.135-0.155 mm |
Ec | 9-12 mJ/c㎡ |
Building layer thickness | 0.1-0.15mm |
Mechanical Properties of Post-Cured Material
MEASUREMENT | TEST METHOD | VALUE |
|
|
|
Hardness , Shore D | ASTM D 2240 | 74~82 |
Flexural modulus , Mpa | ASTM D 790 | 2,650-2,750 |
Flexural strength , Mpa | ASTM D 790 | 60- 75 |
Tensile modulus , MPa | ASTM D 638 | 2,150-2,370 |
Tensile strength , MPa | ASTM D 638 | 25-30 |
Elongation at break | ASTM D 638 | 12 -20% |
Impact strength notched Izod, J/m | ASTM D 256 | 58 - 70 |
Heat deflection temperature, ℃ | ASTM D 648 @66PSI | 58~68 |
Glass transition,Tg, ℃ | DMA，E”peak | 55~70 |
Density, g/cm3 |
| 1.14~1.16 |
Dielectric Constant 60 Hz | ASTM D 150-98 | 4.1~5.0 |
Dielectric Constant1 kHz | ASTM D 150-98 | 3.2~4.2 |
Dielectric Constant 1 MHz | ASTM D 150-98 | 3.2~4.1 |
Dielectric StrengthkV/mm | ASTM D 1549-97a | 12.7~16.2 |
Remarks: The temperature in using and storing KS908C UV Resin should not be too high, please use it below 25 ℃; the relative humidity must be below 38%.
UV resin 355nm; SLA resin cost; how much does resin cost; photosensitive resin; 3D printing material
